Português 
Español 
简体中文 
Unverified company
Facebook
Whatsapp
Twitter
Linkedin
Description
The installation is used for cleaning the air when cutting metal with laser and plasma. The base of the installation are filter elements with the ability of regeneration. These filter elements provide the entrance of exclusively purified air in the factory premises.<br>During the operation of the installation the contaminated air enters through the inlet and is passed though the filter elements. Dust and slurry are collected on the outer surface of the filter elements. Purified air passes through the center of the filter elements to the purified air chamber , from where it is discharged through the discharge port and is mixed with the outside air .<br>During filter regeneration cycle the power to the solenoid valve is provided , then the valve of the corresponding membrane is activated and sends a pulse of compressed air through the filter elements (from inside outwards) , removing the accumulated dust from the exterior surfaces of the filter elements.<br>Installation «PROmAIR» is available in four versions : «PROmAIR 3000 », «PROmAIR 6000 », «PROmAIR 9000 » and «PROmAIR 12000».<br>
- Air filtration
- air purification
- filteres
- ventilation
Production Capacity:
Not informed
Delivery Timeframe:
Not informed
Incoterms:
Not informedPackaging Details:
Not informed
More about
Bdc-R&d
Employees
Not informed
Not informed
Year
Established
Business type
Keywords
- Filtros de ar
- purificação de ar
- purificador de ar
- soldagem
- rectificação
- montagem elétrica
- Air filters
- air purification
- air purifier
- welding
- grinding
- electrical mountaing. Ver Mais
Contact and location
-
Anna Titova
-
+375 29 xxxxxxxx
-
Minsk / | Belarus
Anna Titova
+375 29 xxxxxxxx
