foshan gelanboshi technology co.，ltd

Aluminum profile extruder
Features: Horizontal single-move short stroke aluminum extruder (left type) using horizontal three-beam four-pillar pre-stress combination frame structure, short-stroke feed positive extrusion mode, oil pump direct drive, equipped with advanced mechanical and electrical fluid control components and systems, as well as a complete set of mechanized auxiliary equipment, the use of PLC and computer two-stage control, so that the speed, position and pressure of the press to be precisely controlled. The main technology used embodies the advanced technology level of the extruder, as a leader in China's aluminum profile industry, this model for The Vanges company with strong research and development capabilities independently developed is the most advanced extruder production line in China.

Horizontal single-move short stroke after the material aluminum extruder (left type) using horizontal three-beam four-pillar pre-stress combination frame structure, short stroke after the feed positive extrusion mode, oil pump direct drive, equipped with advanced mechanical and electrical fluid control components and systems, as well as a full range of mechanized auxiliary equipment, the use of PLC and computer two-stage control, so that the speed, position and pressure of the press to be precisely controlled. The main technology used embodies the advanced technology level of the extruder, as a leader in China's aluminum profile industry, this model for The gelanboshi company with strong research and development capabilities independently developed is the most advanced extruder production line in China.

1. Host section:
The structure design uses the calculation 3D finite technology to analyze the stress, displacement temperature, etc. of the frame, extrusion cylinder, etc., and the structure is more optimized and reasonable
Cylinder main cylinder, front beam extrusion rod and other major components are made of high-quality cast steel / forged steel, ultrasonic three-stage visit treatment
The main plunger is made of cold hard cast iron, and the surface of the piston rod is finely polished with hard chrome with little roughness.
Advanced front beam assembly with fast die-shifting, mold-changing device, easy to operate and maintain.
The flat rail structure adjusts the center of the active beam to make the squeeze center of the calibration machine easier.
2. Hydraulic part:
The pump station adopts the integrated design with the latest electro-hydraulic proportional pump optimization combination to meet the pressure requirements of the extruder, each pump independently works without interference, the computer is controlled online, and the seismic design can greatly reduce the failure rate
The hydraulic system is divided into centralized lubrication and dispersion lubrication combination, lubrication performance is more guaranteed to be excellent
The operating system consists of an integrated control valve block) equipped with a pressure sensor that enables the system to achieve speed control, pressure control and constant extrusion to meet special extrusion process requirements. The high-pressure part is sealed with imports and less oil leakage.

3. Electronic control part:
Using the upper industrial control computer and PLC dual-stage control, extruder parts equipped with communication capacity, real-time process control
The operator panel is set to manual, semi-automatic/automatic, reflecting the user-friendly design concept.