FUJIAN CALLIOPE PUMPS CO

Product Type: Booster Pump
Operating voltage: 24V
Insulation Grade: Class H
Booster effect: 80Pa
Flow rate: 30L/min
Head: about 27 meters
Pipe I.D.: Approx. 15mm/0.59in
Fluid temperature: 0-65°C

Package Contents:
1 x pump
1 x Power Adapter
1 x water pipe
1 x User Manual
2 x expansion screws

Note:
1. Tips: The pump has a built-in water on/off valve. A minimum rate of 1.5 L/min is required to flush the valve to start the pump. If the water switch cannot be flushed, the power must be disconnected again for 3-5 seconds, and the water pump will be forced to start for 10 seconds. If it stops automatically after 10 seconds of power-on, it means that the water switch valve is not opened.
2. Test method: take a mineral water bottle and connect it, the general mineral water bottle is a 500ml bottle, and you can connect about 3 bottles in a minute, and you can install and use it.