Huzhou Fuda Electrical Technology Co.,Ltd

The temperature index test should be performed on IEC 60172 on an un-impregnated paint coating sample with a diameter of 1.000 mm and a film thickness of 2 levels.
The temperature index shall not be less than the specified value of the relevant product standard, and the failure time at the minimum test temperature shall not be less than 5000h. See refrigerant resistance in the relevant product standards.
Direct welding can be found in the relevant product standards.
Thermal bonding is required to comply with the relevant product standards.
For dielecctor loss factors, see the relevant product standards. Refer to the relevant product standards for transformer resistance.
The type of packaging and packaging may affect some of the properties of the paint packing line, such as rebound. Therefore, the type of packaging (e.g. the type of delivery reel) should be negotiated between the supplier and the buyer to determine whether the paint package line should be wrapped evenly and tightly around the delivery reel or placed in a container. Unless an agreement is reached between the supplier and the buyer, no more than one row of paint lines shall be delivered in the reel or container. If there is more than one segment, both supply and demand should agree to mark the length and/or packaging of the segment on the label. When the paint package is delivered in a ring, the size and maximum weight of the ring shall be determined by the supplier and the purchaser.