KINTE MATERIALS SCIENCE AND TECHNOLOGY CO., LTD.

Product Name: Water-based two-component polyurethane topcoat AP-87388
Product composition It consists of water-based modified acrylic resin, isocyanate curing agent, deionized water, water-based additives, and environmentally friendly pigments and fillers.
Product Introduction This product is widely used in the surface protection coating of special vehicles, agricultural machinery, automobile engines and mechanical equipment compressors, etc., which plays a good decorative and protective role, and is suitable for manual spraying and automatic line spraying.
Product Features  Low VOC and no pungent odor.
 Normal use does not pose any health risk.
 It has outstanding resistance to multiple climatic conditions and operating environments, excellent UV resistance.
 After curing, the paint film has excellent wear resistance, impact resistance and chemical resistance.
 Used with electrophoresis primer, AE-29000 series, AE-7200 series water-based primer, can resist the impact of industrial erosion environment.
Solid content (105°C×3hr) 43±3%
Specific gravity 1.15-1.25
A dry film thickness of 30-50 μm is recommended
VOC ≤10%（w/w）

Applicable substrates Suitable for metal substrates such as cast iron and carbon steel
Packing component A: 20KG/drum Component B: 3.4KG/can
Storage period The storage period of paint is six months, please be sure to use it within the storage period to avoid affecting the quality;
Coatings (including curing agents) should be sealed and stored in a cool place, waterproof, leak-proof, sun-proof, high-temperature-proof, and away from fire sources;
In winter, the paint should be stored in an environment above 0°C to prevent the coating from freezing and affecting the coating quality