Linhai Yida Electronic CO. , LTD

Fully automatic charger constant current constant pressure work, set charging and regulatory function in one, can protect the battery.
1. The fully automatic charger protects the battery.
Ordinary charger does not have a regulatory function, when the generator issued a high voltage charge more, low voltage charge less, sometimes forget to close the gate, the original battery charge 5 hours on full but often charged 20 hours, resulting in the battery often overcharged, the battery two months on the bad.
 2. Fully automatic charger constant current constant pressure working principle: (1) Constant current: when the voltage of the generator output is 160V to 360V, if the current is set at 50A, the output current is constant lying at 50A when charging.
 (Current values can be set on their own) (2) Constant voltage: The peak voltage of the battery DC24V is 28V.
 When the charger voltage is equal to the peak voltage, i.e. 28V, the charger will automatically stop supplying power to the battery, stabilizing the DC grid voltage. (3) When other electrical equipment start sending start to work, it will cause the voltage to drop, in order to stabilize the voltage at 28V, the charger automatically starts to work, for the load equipment to stabilize the power supply. When the 50A load is exceeded, the battery is powered together and the charger starts to charge the battery automatically. General batteries play an auxiliary role and are rarely used to extend battery life.