Description
Remote axle load control and cargo weight calculation are highly demanded features of the GPS tracking systems. We developed Eurosens Difference onboard weighing system which provide features:
■ Individual axle load measurement for truck and trailer.
■ Cargo load calculation.
■ Axle overload alarm.
■ Show axle load and cargo weight at the driver’s display.
■ Transmit axle load and cargo weight values to the GPS tracking system
Eurosens DDS converts the angle of rotation of the sensor’s lever to output signal. As the transducer is used magnetoresistive sensor.At the output of the sensor is formed stabilized analog voltage signal, which corresponds to the angular position of the pivot arm, changing depending on the load on the axle vehicle
Eurosens DDS 485 uses LLS/MODBUS protocol. Eurosens DDS CAN uses CAN bus J1939 protocol with configurable PGN. After installation and wiring Eurosens DDS you should perform a calibration in which you are mapping the output voltage to the load on the suspension of the vehicle.
Eurosens DDS converts the air pressure in the output voltage or digital messages via serial RS485 or automotive CAN bus J1939 protocol. As the pressure transducer thin-film bridge is used.
- axle load sensor
- cargo weight sensor
- truck weight sensor
Production Capacity:
10000
Delivery Timeframe:
Immediate
Incoterms:
EXW - Ex Works
Packaging Details:
Carton box
More about
mechatronics.by
50-100
Employees
1M - 2M
Sales volume (USD)
80%
% Export sales
Year
Established
Business type
- Industry / Manufacturer
Keywords
- fuel level sensor
- fuel flow meter
- fuel consumption meter
- onboard weighning
- axle load sensor
- tilt angle sensor
- gps tracking Ver Mais
Contact and location
- Anastasiya Martsynkouskaya
- +375 17 xxxxxxxx
- Vilejka / Minskaja voblast | Belarus