Qinhuangd Shengchuan Construction Material Co.,Ltd.

The disc buckle scaffold is composed of the pole connection plate, the buckle joint pin, the horizontal rod end buckle connector, the horizontal bar, the slope rod, the angle rod end buckle joint, and the pole.
Connect the crossbar with this novel, beautiful disc with a connection sleeve at the bottom. The crossbar is made of a plug with a pin welded at both ends of the steel pipe. Build a disc buckle scaffolding to be prepared in advance to build a plan, and then by the construction plan from bottom up, pole, crossbar, oblique lever order step by step. In the construction process should be strictly in accordance with the plate buckle scaffolding construction specifications. It is strictly forbidden to use more than the load amount, construction personnel should also do a good job of safety measures in accordance with the provisions, not allowed to chase on the construction platform, etc. Construction is not allowed in high winds, thunderstorms and other weather. Remove the disc buckle scaffolding to be unified planning, in accordance with the order of construction in reverse demolition, in the removal should also pay attention to light and light, strictly prohibited direct throwing. The removed parts should also be neatly placed. Storage disc buckle scaffolding to be separated according to different components, the requirements of neat code, and to be placed in a dry, well-ventilated site. Also, choose a place where corrosive objects can be stored.