Yingfa Plastics

LOFT floor slab, also known as LOFT steel structure floor slab, is a high-density fiber pressure plate with steel structure as the sandwich, which is often used in a new generation of high-rise (4,8---5.6m) duplex building mezzanine slab. Due to its light weight, high strength, thin thickness and other characteristics, its room appears tall and open, with stronger fluidity and development, the overall appearance of the room is brighter and more artistic!
Product Introduction:
One. Production process: LOFT steel structure floor slab is based on Portland cement, natural minerals and fibers, cement, pulp as the main raw materials, after pulping, molding, high compression, high temperature steaming made of plates.
Two. Features:
(1) Light weight, reduce building load  
(2) Good sound insulation effect  
(3) The thermal conductivity is low, and the thermal insulation effect is good  
(4) Fireproof and waterproof, is a class A non-combustible new floor slab material
(5) The density is large, so the strength is large, and the load-bearing load per square meter is large  
(6) The thickness of the floor slab is thin, generally 1200×2400× 20 ~ 30mm, which expands the use space of the house
(7) The construction is simple and fast, the comprehensive cost is low, and the construction rarely produces garbage  
(8) The normal service life is generally more than 50 years.
Third, technical parameters:
Material: Portland cement, quartz sand, reinforced fiber and other flame retardant materials
Fire resistance features: Class A non-combustible material (GB8624-2012)
Apparent capacity: greater than 1.50g/cm3
Factory moisture content: 16Mpa (GB/T7019-2014)
Wet rate:0.19%(GB>0.09%(GB> 16Mpa (GB/T7019-2014)
Wet rate:0.19%(GB>0.09%(GB>10%
热传导系数：平均0.24W/MK(Jc>10%>10%>