Zhejiang Anthonor Environmental Technology Co.,Ltd

Pulsed folding filter through the folding structure, without changing the original size of the dust remover, the filter area will be increased to 3-5 times the original, greatly reducing the filtration wind speed, improve the capture efficiency of fine dust.
All-in-one program
Because the pulsed folding filter cartridge is designed to integrate the folding filter cartridge with the skeleton, the problem of poor matching between the filter bag and the bag cage is avoided.
The advantages of disassembly, filter elements are short and small, easy to install (top loading), easy to access and replace
When changing the regular filter bag, the bag cage needs to be removed first, and then the filter bag needs to be installed first, and then the bag cage needs to be installed. The pulsed folding cartridge can be disassembled and installed only once due to its all-in-one structure.
Renovation advantages
Pulsed folding filters can achieve ultra-low emissions of 10mg/m3 without retrofitting the dust collector when space constraints prevent it from achieving ultra-low emissions.
The filter area increased 3-5 times, and the filter wind speed decreased significantly
The pulsed folding filter filter area of 130 x 2000mm is equivalent to the filter bag of the equivalent of the filter box of the 130 x 7300 mm to the equivalent of 130 x 10000 mm.
Significant decrease in ash cycle/ash removal strength (helps to extend the life of the filter cartridge)
On the one hand, the dust settles freely, the load on the filter barrel is much smaller, on the other hand, the gas cloth ratio increases, the resistance decreases significantly.
Dynamic dust removal rate increased by 99.994%, suitable for a variety of ultra-low emission requirements
Under good operating conditions, ultra-low emissions of 5mg/m3 can be achieved using pulsed folding cartridges.
The filter barrel is short in length and has a large excess space, which is conducive to dust settling
Simple lengthening filter bag, will form turbulence at the bottom of the dust remover, on the one hand, the dust of the dust bucket blown up, while affecting the dust down the dust drop.
Folding material
The special structural design of folding material, using ultra-efficient filtration precision material, PM2.5 interception rate of 99.989%.
Self-melting technology
The traditional glue is replaced by a unique self-melting technology, and special high temperature straps can be used to meet the operating temperature of 240 degrees C.
Support the skeleton
The entire skeleton is reinforced by rotation without overlapping burrs.
A variety of options
The bottom of the filter head is divided into hard PU and soft PUR two materials, the filter core has galvanizing and PPL two materials, for customers to choose from.
Application areas
Products are currently in steel (coking, ball, sintering, blast furnace), cement (coal grinding, kiln head, cement grinding), non-ferrous metal smelting (mine, coking, smelting), casting (melting furnace, polishing, grinding) and other industries, especially to meet the needs of many enterprises do not transform dust removers to achieve ultra-low emissions.