Description

The detector is suitable for high-rise buildings, cultural relics protection building facilities, halls, halls, warehouses and other large space places. The detector combines the transmitting and receiving...

The detector is suitable for high-rise buildings, cultural relics protection building facilities, halls, halls, warehouses and other large space places. The detector combines the transmitting and receiving parts into one, which is simple and convenient to install, and has good optical path collimation. ; With automatic compensation function, it can automatically compensate for dust pollution, position shift and aging of the launch tube. Three levels of sensitivity can be set on-site, suitable for sealing and waterproof design in different places; non-coding type. JTY-HF-GST102 type linear beam smoke fire detector is a non-coding reflective linear infrared beam smoke fire detector. The detector must be used with the reflector, but one or four reflectors need to be used depending on the installation distance between the two. The detector has the following characteristics: (1) Combining the transmitting part and receiving part into one, the installation is simple and convenient, and the optical path collimation is good; (2) With automatic calibration function, to ensure that debugging can be completed by a single person in a short time, the operation is simple and convenient; (3) With self-diagnostic function, it can monitor the internal failure of the detector; (4) With automatic compensation function, it can automatically compensate for factors that reduce the received signal, such as dust pollution, position deviation and aging of the transmitting tube to a certain extent; (5) Three levels of sensitivity can be set on site, suitable for places with different dust levels; (6) With fire alarm and fault passive output contacts; (7) The design of the detection light path is clever, and the anti-interference performance is strong; (8) Sealed design with waterproof performance.